1.625" x 16 Ga x 2.5" 180 Deg Bend 304
$41.00
(No reviews yet)
Write a Review
1.625" x 16 Ga x 2.5" 180 Deg Bend 304
Mandrel bent 1 5/8" tube in 16 gauge 304 Stainless Steel. Bent to 180 degrees with a center line radius of 2 1/2". The bend has 6" long legs.
304 Stainless Steel is the most common grade of stainless steel. It has excellent forming and welding characteristics. 304 stainless has very good drawability; its combination of low yield strength and high elongation permits successful forming of complex shapes. It offers excellent resistance to a wide range of atmospheric, chemical, textile and petroleum exposures.
- Most common grade of stainless steel
- Excellent forming and welding characteristics
- Excellent drawability – its combination of low yield strength and high elongation permits successful forming of complex shapes
- Resistance to a wide range of atmospheric, chemical, textile and petroleum exposures.
- Ease of cleaning, ease of fabrication, beauty of appearance
- Does not stain, corrode or rust as easily as ordinary steel (it stains less, but is not stain proof)
- Degree of Bend:
- 180
- Outside Diameter:
- 1 5/8"
- Center Line Radius:
- 2 1/2"
- Material:
- 304 Stainless Steel
- Gauge:
- 16 (.065")
