2.125" x 18 Ga, 27 & 3 Deg 2-Way Merge Collector 304
$250.00
(No reviews yet)
Write a Review
2.125" x 18 Ga, 27 & 3 Deg 2-Way Merge Collector 304
An offset 2-way merge collector with 2 1/8" tube inlet at 27 degree & 3 degree bends. Made from 18 gauge (.049" wall) 304 stainless steel and finished to your specified throat diameter.
304 Stainless Steel is the most common grade of stainless steel. It has excellent forming and welding characteristics. 304 stainless has very good drawability; its combination of low yield strength and high elongation permits successful forming of complex shapes. It offers excellent resistance to a wide range of atmospheric, chemical, textile and petroleum exposures.
- Most common grade of stainless steel
- Excellent forming and welding characteristics
- Excellent drawability – its combination of low yield strength and high elongation permits successful forming of complex shapes
- Resistance to a wide range of atmospheric, chemical, textile and petroleum exposures.
- Ease of cleaning, ease of fabrication, beauty of appearance
- Does not stain, corrode or rust as easily as ordinary steel (it stains less, but is not stain proof)
- Inlet OD:
- 2.125"
- Degree of Bend:
- 27 & 3
- # of Inlets:
- 2
- Material:
- 304 Stainless Steel
- Gauge:
- 18 (.049")
