2.25" x 18 Ga x 3.5" 180 Deg Bend 304
$62.00
(No reviews yet)
Write a Review
2.25" x 18 Ga x 3.5" 180 Deg Bend 304
A mandrel bend of 2 1/4" OD tube in 18 gauge 304 stainless steel. Bent to 180 degrees with a center line radius of 3.5". The bend has 6" long legs.
304 Stainless Steel is the most common grade of stainless steel. It has excellent forming and welding characteristics. 304 stainless has very good drawability; its combination of low yield strength and high elongation permits successful forming of complex shapes. It offers excellent resistance to a wide range of atmospheric, chemical, textile and petroleum exposures.
- Most common grade of stainless steel
- Excellent forming and welding characteristics
- Excellent drawability – its combination of low yield strength and high elongation permits successful forming of complex shapes
- Resistance to a wide range of atmospheric, chemical, textile and petroleum exposures.
- Ease of cleaning, ease of fabrication, beauty of appearance
- Does not stain, corrode or rust as easily as ordinary steel (it stains less, but is not stain proof)
- Degree of Bend:
- 180
- Outside Diameter:
- 2 1/4"
- Center Line Radius:
- 3 1/2"
- Material:
- 304 Stainless Steel
- Gauge:
- 18 (.049")
