3.5" x 4" x 16 Ga, 7 Deg Collector Transition MS
$27.00
(No reviews yet)
Write a Review
3.5" x 4" x 16 Ga, 7 Deg Collector Transition MS
A collector transition with a 3 1/2" tube inlet and 4" tube outlet with a 7 degree divergent angle. Made from 16 gauge (.065" wall) mild steel.
Mild Steel – Mild steel is the most common form of steel as its price is relatively low. It is neither extremely brittle nor ductile, and has a low tensile strength. It becomes malleable when heated and therefore can be forged. Mild steels surface hardness can be increased through carburizing. Mild steel will rust.
- Most common form of steel
- Price is relatively low
- Neither extremely brittle nor ductile
- Becomes malleable when heated and therefore can be forged
- Surface hardness can be increased through carburizing
- Will rust
- Inlet OD:
- 3.500"
- Outlet OD:
- 4.000"
- Divergent Angle:
- 7
- Material:
- Mild Steel
- Gauge:
- 16 (.065")
