Pro Mod Blower Lightweight Stainless Zoomie Kit 2.75" OD
$1,550.00
(No reviews yet)
Write a Review
Pro Mod Blower Lightweight Stainless Zoomie Kit 2.75" OD
2 3/4" Pro Mod Blower Stainless Zoomie Kit Contains:
(2) 78 Deg Bends, 321 Stainless Steel, 20 Ga (.035"), 2.75" OD x 4.00" CLR, 6" & 16" legs
(2) 81 Deg bends, 321 Stainless Steel, 20 Ga (.035"), 2.75" OD x 4.00" CLR, 6" & 16" legs
(2) 84 Deg bends, 321 Stainless Steel, 20 Ga (.035"), 2.75" OD x 4.00" CLR, 6" & 16" legs
(2) 87 Deg bends, 321 Stainless Steel, 20 Ga (.035"), 2.75" OD x 4.00" CLR, 6" & 16" legs
(4) 90 Deg bends, 304 Stainless Steel, 16 Ga (.065"), 2.75" OD x 6.00" CLR, 8" legs
(8) Floater Sleeves
(4) Floater Stops
(8) End Sleeves
(2) Hanger Brackets
(4) End Braces
Stainless Steel has excellent forming and welding characteristics. It has very good drawability; its combination of low yield strength and high elongation permits successful forming of complex shapes. It offers excellent resistance to a wide range of atmospheric, chemical, textile and petroleum exposures.
- Excellent forming and welding characteristics
- Excellent drawability – its combination of low yield strength and high elongation permits successful forming of complex shapes
- Resistance to a wide range of atmospheric, chemical, textile and petroleum exposures.
- Ease of cleaning, ease of fabrication, beauty of appearance
- Does not stain, corrode or rust as easily as ordinary steel (it stains less, but is not stain proof)
**Optional Add-ons**
